Hello, back again, we upgraded to 2020 and I've had nothing but issues. My main one is the hole wizard. I can get into the hole wizard just fine but once I start editing the sketch I cannot exit. The check box and X are grayed out and the only way to move along is to terminate SW in the task manager.
4 лет назад
Hi All, this is my 1st post in forum, is there any solution to fill the blank cells with dash automatically please look into the screenshot your help will be very appreciated. thanks Regards WAM SolidworksDrawings And Detailing
4 лет назад
Hi everyone. A few days ago I am having problems with the tables of, lists of materials. I want to break the link to modify the description in a cell, but it automatically comes out without letting me edit it. As if it was locked.
4 лет назад
We have SolidWorks set up to add a Revision Block on Sheet 2 with the Multiple Sheet Option "See Sheet 1" selected. The rev block populates with text "See Sheet 1" center justified in lower case and dashes in the Rev, Date and Approved cells. Is there a way to format the text in uppercase and left justified and remove the dashes? Thanks SolidworksDrawings And Detailing
4 лет назад
Hello everyone, Please see the image below. To fill in the table I double-clicked on the dimension to import into the table but the rest of the dimension is not showing and the format has changed, but not for all of them. Do you have any suggestions for this? SolidworksDrawings And Detailing
4 лет назад
Which is the best way to open Solidworks models or assemblies in Vectorworks SolidworksDrawings And Detailing
4 лет назад
Can I open Solidworks 3D or Solidworks Assembly files in Autocad Lt. I tried importing it but ends up with an error (You have selected an unsupported DGN file. only V7 and V8 files are supported.) SolidworksDrawings And Detailing
4 лет назад
Is there a way to show the split lines on the 2D drawing? SolidworksDrawings And Detailing
4 лет назад
The 3DEXPERIENCE World 2020 SOLIDWORKS Top Ten List is closing this Friday, January 31st! Finalize your votes now before it is too late! Please see this link for more details: www.solidworks.com/top_ten SolidworksDrawings And Detailing
4 лет назад
Ordinate dimensions are coming at a fixed angle and not in a vertical position. Remember - the vertical origin surface is not perpendicular to the horizontal plane. Intentionally I tilted the flat pattern to show my requirement dimension SolidworksDrawings And Detailing
4 лет назад
Hello I have done a pattern from (6x) holes on a surface , and I want only modify one of holes of the pattern elements in his design, how can I do that. Have I isolated one of the whole for to change his design. KG Helmut SolidworksDrawings And Detailing
4 лет назад
When I create a BOM based off of the detail view, it includes all of the parts from the main view that the detail view is based off of. Normally this is fine. However, for this case I have an exploded view and was hoping I could create a BOM of only the parts in the detail view. Is there any way to do that?
4 лет назад
Hey again guys, I'm editing my BOM and I have some parts which are made from weldment features. I rename the weldment feature to the nominal size according to a chart. Is there a way to link this name to the custom properties in order to fill my description column in the BOM with it? SolidworksDrawings And Detailing
4 лет назад
i using excel base boms in solidworks and i link the data to another excel file (fileA) (copy&paste link). once i reopen the fileA, it display like this and cannot be resolved. How to solve this. plz help me i using microsoft office 2019, solidworks 2019 SolidworksDrawings And Detailing
4 лет назад
why isn't pack and go not grabbing the lower level drawings when i pack and go from the top level drawing of an assembly? i have drawings made for the parts in this assembly, yet pack and go doesn't see them? anyone have this issue? SolidworksDrawings And Detailing
4 лет назад
I want to trim section under GDNT symbol, but didn't know any quick way to do. Please guide me. Thanks SolidworksDrawings And Detailing
4 лет назад
Hello friends, as you can see in the title above, I have a bunch of existing parts and assemblies created in an old templates and now I need to save this in the new template. Is there a easy way to do it? In fact, I just need to add material and mass properties in the files. SolidworksDrawings And Detailing
4 лет назад
hole wizard did the hole notation change SolidworksDrawings And Detailing
4 лет назад
export dxf problem what is the problem. SolidworksDrawings And Detailing
4 лет назад
How can I link one note to two items? SolidworksDrawings And Detailing
4 лет назад
Hi folks, in Brazil, we have a standard demands the angle of dimensions arrow being 15º. Is there a way to change it without using trigonometry all the time I have to change its dimensions? SolidworksDrawings And Detailing
4 лет назад
Hi people. I need help. I set a BOM and added a new column related to reference pages. I have a main assembly with this BOM describing its sub-assembly and this reference page indicates in which sheet the sub-assemblies are detailed.
4 лет назад
Ladies and gentlemen, help a friend, please. I need to supress some not top level item just in a specific configurations I have created. I tried to do it selecting the items, going to Edit > Suppress > This configuration but when I will check the items its was supress in all configurations. I just could suppress items in this way when the item was top level items.
4 лет назад
Hello everyone, I am a new member so I apologize if this post is in a wrong place. So I am working on this part but I did something wrong and now it's reversed in terms of hollow and solid parts. Now if I use extrude boss it will extrude the hollow parts instead. How do I reverse it?
4 лет назад
