any way to fix interference like this? its occurring when the circular part and the paste touch: here is a zoom in they are touching because i am running a thermal sim, and need them to touch i use coincident mate but why is it doing this? SolidworksModeling And Assemblies
3 年 前
In windows explorer with the "SW last saved" property tab enabled I'm only seeing Future Version displayed and not the last version the file was saved in. This is also true if right clicking and showing file properties on a particular file. Is there an obvious toggle under SW options that all users in my office are missing? SolidworksModeling And Assemblies
3 年 前
When I save an assembly under a new part number solidworks prompts me to save every individual part as well. This can get old real quick when you have a couple hundred parts in your assembly. Is there any way I can save an assembly under a new part number that still uses all the existing parts? SolidworksModeling And Assemblies
3 年 前
Hello everyone, I intend to buy a cnc cutter for the tubes. This would simplify assembly in the workshop. The goal would be to embed the tubes at the junctions. I can't find a fast and efficient feature that allows me to do this.
3 年 前
Need help modeling this: sort of like a rectangular patterns going in on itself currently im doing it line by line any easier way? maybe a patterns option SolidworksModeling And Assemblies
3 年 前
Is the hole wizard correct if trying to create a M2.5 CSK? The diameter is reading 0.217" however when I put an actual screw in the model (downloaded from McMaster), it looks too small. The head diameter of the screw is 0.185" which appears to be correct. Thoughts?
3 年 前
Hi, I would like to rotate the view in SolidWorks. For example, clicking on "normal to" the right plane shows my Y-axis to the upward direction like the figure below. However, I would like to have my Z-axis in the upward direction. Could you please tell me how can I do that?
3 年 前
I am facing error while using pin connector Please any solution Thank you SolidworksModeling And Assemblies
3 年 前
I am preparing for CSWP right now. I am confident that I have modeled appropriately. But I don't receive the required the result. I have provided the screenshot of my question.
3 年 前
Hi everyone When Extruded-Thin overlap other layer it doesn't cut through the holes of the bolts! how can I fix this PLZ? SolidworksModeling And Assemblies
3 年 前
Hi guys I need help on Extruded-Thin Feature. I want to have two different dimensions on my bolts, is there anyway to make 2 different bolt thickness within the same sketch, for example 6mm and 10 mm and extruded it together. this is Smart modeling It make it easier and faster for me to change later on if its one sketch instead of two. SolidworksModeling And Assemblies
3 年 前
Can exploded view work on a model break view assembly? SolidworksModeling And Assemblies
3 年 前
Hi I model this model in Inventor I attached Rhino and STEP file for more details. I'm finding a way to model it in Solidworks. SolidworksModeling And Assemblies
3 年 前
When I try to combine different drawing sheets in one sheet only, I have got the below error message, also I have found that some dimensions turn into yellow color in combine sheet drawing. Also, I want to know that is combine drawing file also reference to the original drawing file? SolidworksModeling And Assemblies
3 年 前
When editing the mates of parts within an assembly, as I suppress or edit a mate, the next thing I know SW takes me to a place in the feature tree that doesn't even pertain to the part I'm modifying the mates to. From there I need to scroll back to where I was doing the alterations to continue. Why is that? SolidworksModeling And Assemblies
3 年 前
Hello, as the title says, how can i export some bodies from multibody part to a single part?. thanks in advance, Bruno. SolidworksModeling And Assemblies
3 年 前
Hi , In Rhino one rail sweep with 3 section curve can get this, but how can i sweep or loft this in Solidworks? It seems the loft body cannot follow the centerline correctly. Thanks. SolidworksModeling And Assemblies
3 年 前
I basically have a tube with slots cut in a pattern down the length, and I need to coil it in a spiral. However, when I use the flex command to take the straight tube and coil it, I get a weird render issue where the solid looks inverted somehow. Not sure why this is; any fixes or other methods to achieve this same part?
3 年 前
As you can see on the picture my part not parallel and I don't how to make it parallel. when i click front view the part shows like in the picture. can anyone help me? it is urgent. thank you SolidworksModeling And Assemblies
3 年 前
Having an issue in assemblies where I create a section view of solid parts, and they display as if they are surface/thin features, see example below. Just started getting this recently. Is this a setting that's easy to change back so they will display as solid bodies in section views? SolidworksModeling And Assemblies
3 年 前
This is my first attempt at a more complex part, and am learning as I am going. I am attempting to shell the part, but am receiving errors (That I frankly don't fully understand): The yellow highlighted portions--are these the areas giving me the potential issues? Thanks for any help! SolidworksModeling And Assemblies
3 年 前
Hello! I´m trying to fold back this sheet metal piece after cutting it. However for some reason it modifies the geometry of one of the cut parts on the right side. I don´t know what i´m doing wrong here, I made sure the "normal cut" box was checked and after cutting the piece, all cuts seemed ok.
3 年 前
My question is I am modelling round part with the slots going from center out, the slots are not through part and not through sideways, the slots have angle bottom(for blind slots), starting from different circumference and ending at different circumference. Please see attached pictures. SolidworksModeling And Assemblies
3 年 前
