探索 SOLIDWORKS 使用者討論的內容。
Good Afternoon All, I believe that I already know the answer to this is "NO", but this is my final effort before starting the process.
SOLIDWORKS Forums
3 天 前
I am using different grade and material fasteners. For example I have both a .250-20UNCx1" grade 5 bolt and a stainless .250-20UNCx1" bolt and a .250-20x1" grade 8 bolt. They are used on different projects but they all share the same toolbox. How can I assign different part numbers to them even though they are the same configuration of the toolbox component?
SOLIDWORKS Forums
4 天 前
SLDLFP Thread Profiles I know this probably has been asked before but a quick search didn't show any results.
SOLIDWORKS Forums
5 天 前
I copied the Toolbox ANSI Inch standard to make a customized standard, and I get different results from the field. Can that table be edited somewhere? I edited the calloutformat.txt file at the same time, and my changes are showing up. However, the result from the field is different between the two standards even though it was a direct copy.
SOLIDWORKS Forums
9 天 前
Does anyone face this issue with tool box? Iam getting an error message while opening the tool box setting and only allowing me to edit the hole wizard in tool box.
SOLIDWORKS Forums
18 天 前
I need know what write in box "enabled1" when i´m going add a threaded hole in hole wizard - toolbox. Please help me, I´am from Peru. Tags:none(add)hole wizard solidworks 2015.
SOLIDWORKS Forums
19 天 前
2.25 diametral pitch can not be found in ansi inch of toolbox. Jive Software Version: 2016.3.8.1, revision: 20171004112525.b7233dc.nomerge_2016.3.8.1
SOLIDWORKS Forums
24 天 前
Recently I added material properties to my toolbox screws in order to get more accurate weight properties for some parts, that much worked fine. However, since I did this the first revolve in the toolbox part file has been set to Hidden by default so once a screw is added to the assembly it will be hidden until I slick show in the Feature Manager (which will Show all screws added in the same operation).
SOLIDWORKS Forums
1 月 前
The hex nuts are in the toolbox, and all of the part numbers are assigned to them. When I go to add a smart fastener and then add to the bottom stack, the standard hex nut doesn't even show up as an option. But I don't have "Hex Nut" as an option.
SOLIDWORKS Forums
1 月 前
I am trying to add a size to the toolbox for weldment structural profiles. Where can I find the information that the program is asking for? It won't let me add a size unless all the fields are complete.
SOLIDWORKS Forums
1 月 前
Please anybody hereto help me, fix toolbox problem in solidworks. Check and make sure that toolbox path is correctly mapped under Tools > Options > Hole Wizard/Toolbox
SOLIDWORKS Forums
1 月 前
Toolbox showing extra unwanted parts If I understand correctly, the toolbox contains database driven parts. when a particular size of part is added to an assembly then the toolbox creates the appropriate configuration and that is saved for future use. The configurations for the different sizes don't really exist until that size of part is used.
SOLIDWORKS Forums
1 月 前
Hello, I recently saved a copy of a screw from the toolbox as a different part with a new name in a different folder, I had to do this because I couldn't find the exact screw I needed so I modified some measurements and added specific configurations to this copied part. When I add that new part to an assembly everything seems fine, then I save the assembly and before opening it again I check that it references the screw that i just created, everything ok so far. But when it opens the assembly it
SOLIDWORKS Forums
2 月 前
Smart Fasteners' Bottom Stack issues I have several countersunk holes in a plate to descretely bolt components to. When in the assembly, after applying all the mates, I attempt to use the Smart Fasteners tool to add the countersung screws and associated hardware.
SOLIDWORKS Forums
2 月 前
Just had a disappearing Toolbox issue after doing a Windows update. VAR JUST found the cause last night. (July 16-17)
SOLIDWORKS Forums
2 月 前
In Windows 7 I use "sldsetdocprop.exe"...how do I break toolbox links while running an install in Windows 10? You can still use the same tool. Are you saying it's not working, not available or another issue?
SOLIDWORKS Forums
3 月 前
A lot of the standard weldment profiles that are shipped with SolidWorks were obviously made from taking the toolbox structural member shapes and saving out their sketch as a library feature part. Unfortunately, they didn't clear the toolbox flag when they did it so these files still read as toolbox parts. When you take your library and save it into a PDM vault (standard or professional) you get errors that you have toolbox parts in a non toolbox folder. The obvious fix is to run the
SOLIDWORKS Forums
3 月 前
I use SolidWorks student edition which is installed in my PC with toolbox but keep on showing the error message whenever I start SolidWorks software; ERROR: Could not find resource dll for Toolbox Does anyone knows how to solve this problem?
SOLIDWORKS Forums
3 月 前
bolt change Select all bolts and then you can change their size via component properties.
SOLIDWORKS Forums
3 月 前
Toolbox can't find parts We have our toolbox set to create a copy of the part (bolt, nut, whatever) to a common folder called 'ToolboxCopiedParts'
SOLIDWORKS Forums
3 月 前
Unless someone can tell me otherwise, I can't seem to find nyloc nuts in the Toolbox. Someone at my work did download a nyloc and place it in the toolbox area of our PDM, but it has several mate issues. I tried pulling up a toolbox nut to look at the mate references so that I could try to find out how to set the mates up properly - but that was no help.
SOLIDWORKS Forums
3 月 前
I'm trying to use the sldsetdcoprop application to remove some toolbox flags from some part files. I am not able to run this program. I get a windows error box stating that zlib.dll is missing but I find that file is several SolidWorks directories.
SOLIDWORKS Forums
4 月 前
How do I convert a toolbox item to a non- toolbox item? I want to save a toolobx item as a standard part file to modify and check into the vault. Run "SLDSETDOCPROP.EXE" which is in your solidworkstoolboxdata utilities directory.
SOLIDWORKS Forums
4 月 前
Toolbox overrides custom component colors I'm working with SolidWorks 2016 and a custom Toolbox folder
SOLIDWORKS Forums
4 月 前