探索 SOLIDWORKS 使用者討論的內容。
Here the Shut-Off surfaces creates two surfaces. How to understand this? That is what we call the split.
SOLIDWORKS Forums
14 天 前
I need to add text to the surface of mold cavity. I want to have a font that is just a single line. That way it can be cut in with a ball end mill quickly.
SOLIDWORKS Forums
14 天 前
Parting Surface Sheets Wont Knit? I've been working on a mold for a part for quite a while and I've been stuck since it keeps giving me the same rebuild error (cant knit sheets) when I try to make the tooling split. I've made some molds before but I have never run into this problem and I would appreciate some help.
SOLIDWORKS Forums
19 天 前
i´m new in SW and i really need your help. I´m an experienced mold maker and i start a new job and i have to learn now to design the molds. I know how a mold has to look like but i really don´t have experience how i can design a mold.
SOLIDWORKS Forums
26 天 前
Is it possbile to get fiber orientation with SW Plastics Professional or we need to use SW Plastics Premium? Velocity vector at end of filling can predict final fiber orientation? velocity vector could be a first order check probably, would need to be validated
SOLIDWORKS Forums
28 天 前
first at all - i'm new to this Forum, so please correct me if i'm doing something wrong with this post I'm currently working on a mold-design Product (vacuu cleaner) and i'm getting frustrated over the last step of building a core and cavity with the tooling split. No matter in what different ways i've tried to create core and cavity surfaces, i can't manage to get my tooling solit to work...
SOLIDWORKS Forums
1 月 前
Need Library Feature Creation Support We are on to Mold design domain using solidworks.. We used to include mold plate lifting hole on the different faces of the mold plates as shown in the attached screen shot.
SOLIDWORKS Forums
2 月 前
I am a Plastic & Die casting parts designer, So I use Draft Analysis tool more frequently. I am using Solidworks 2014, facing problem with Draft Analysis tool It working initially after that not opening even Clicking on this Tool.
SOLIDWORKS Forums
2 月 前
Thank you very much Team EGS and Mr.Natarajan for the wonderful launch event experience of Solidworks 2018 @ Coimbatore, India. We have benefited with the informative speech and the enhancement updates through out!!
SOLIDWORKS Forums
2 月 前
How the Lay out sketches can be used in the Top Down Mold Design environment effectively? Will it be a good option? Is there any other better approach which can support drastic layout changes or concept changes or even the part model modifications?
SOLIDWORKS Forums
2 月 前
In the process of creating cavity in my work a window pops-up to select option. But in video it is not the case. How to have a control over the pop-up window?
SOLIDWORKS Forums
3 月 前
Mold Design This video shows to create mold using cavity and core. Core is with a shaft like extension.
SOLIDWORKS Forums
3 月 前
I wish to know whether Shut-off Surfaces will work in this case. Because it is not coming may be the reason it is crossing the parting line. Redecos Technologies Aug 23, 2017 10:56 PM (in response to Maha Nadarasa) Shut off surface may not be practical over here.
SOLIDWORKS Forums
3 月 前
Some regions are yellow color in the RHS. How to get all negative draft in the RHS? From what your showing here - no need draft for this part
SOLIDWORKS Forums
3 月 前
Some regions are yellow color in the RHS. How to get all negative draft in the RHS? Jive Software Version: 2016.3.7.0, revision: 20170413171635.a36c780.nomerge_2016.3.7
SOLIDWORKS Forums
3 月 前
Hello guys please help to make mold for this part according to part line Part1.JPG
SOLIDWORKS Forums
4 月 前
Sorry for my very bad English. I learn to create injection molds using a standard sequence of instruments (as in a well-known educational lesson with the housing of the handset). I have no problem with creation of cavity and core for the one part, even if have to edit the surface manually.
SOLIDWORKS Forums
4 月 前
Hello guys please help to make mold for this part please explan to me some steps with mold file
SOLIDWORKS Forums
4 月 前
I am just starting in Molding design, for some reason I can not get this to work , I tried automatic parting surface and this one I created manually but still does not work, I would appreciate any help.
SOLIDWORKS Forums
4 月 前
Dhanraj Plastics Private Limited is a leading organisation of liquid packaging plastics bottles supplier in India. We can also custom design and manufacture products as per client's specifications. We not only manufacture high quality products and on time delivery are our reputation.
SOLIDWORKS Forums
4 月 前
This is a molding of a part. Same feature "shows" eye in the drop down menu but "hides" eye in the column. What is the reason for that?
SOLIDWORKS Forums
4 月 前
Mold Design There is a part(A) in assembly file. A new part (block like part) has been created in assembly file to make a core of the part(A).
SOLIDWORKS Forums
4 月 前
I am in my second year at university (BE Mechatronics) and we have been set an assignment to model a casing for a surface mount printed circuit board. We are expected to design the mold for the part so it can be inction molded (We will not physically create any parts however). I have no experience in design with regards to injection molding / flow design etc and before I go ahead and create my mold etc I am hoping someone can have a brief look at one of my parts (Attached below) to suggest any
SOLIDWORKS Forums
4 月 前
How can I add a draft on the pink surface in the picture? Draft feature refuses :-( Making the draft before adding the wrap results in the wrap not able to succeed.
SOLIDWORKS Forums
5 月 前