探索 SOLIDWORKS 使用者討論的內容。
Hi so in my part, one side is suppose to be extruded 10mm, and another 7mm. However, I accidently extruded the whole thing 10mm and now i don't know how edit the second half to a 7mm extrusion Thanks for your help
SOLIDWORKS Forums
8 小時 前
Is it possible to change the surface geometry of a target face so that it aligns with the geometry of a reference face? The changed face would mimic the shape and location of the reference face. I previously used a CAD system (CoCreate Modeling) that would do this. It was called the "Align" command.
SOLIDWORKS Forums
12 小時 前
I need to draw a continious spline along the sides (from left to right). How can I do that? I provided STEP file for those who don't have SW 2018.
SOLIDWORKS Forums
13 小時 前
Corrupt Solidworks Part File I think I have a corrupt part file. The part opens fine in its default configuration, but when I change configurations it crashes Solidworks.
SOLIDWORKS Forums
14 小時 前
Can anyone help me to model the attached part (that is modeled by point cloud . I'm not sure I understand your requirement. That's a Solidworks part.
SOLIDWORKS Forums
18 小時 前
Total Length Problem! Having a major issue here. Getting ready to order material for these stairs, and somehow total length for every part is the same, but then at the end of the list it starts adding up a new length.
SOLIDWORKS Forums
18 小時 前
So I know you solid works people hate hearing bout other software but I don't know what it would be called in solidworks, Try to explain this as best as I can so in the software I use to has a delete parameters so when you untrim the surface it creates the untrim and makes it part of the part. Does 'Untrim Surface' do what you want it to? Depending on how SOLIDWORKS has created the surface, this should untrim to this form and merge with the edges too.
SOLIDWORKS Forums
23 小時 前
Initially, I used mirror command to do this but it occurred a problem, and then I picked the tick at the option box and it worked. Could everyone explain that to me? It depends on how you've created the cut feature and chamfer feature.
SOLIDWORKS Forums
23 小時 前
Internal Tooth Lock Washer I want to model an Internal Tooth Lock Washer with this dimension. M4.2 means Major Nominal Diameter but this diameter seems less than Inside Diameter (4.47mm) and Outside Diameter (8.25mm).
SOLIDWORKS Forums
1 天 前
What is the easiest way to separate everything I have in a part in separate parts? Have a Pic? Did you draw a part with items on the that would normally be separate?
SOLIDWORKS Forums
1 天 前
I am designing a track made of 3 segments and 2 end pieces. It should be made of sheet metal. The way I've gone about it is by drawing the piece profile and then sweeping it through a path.
SOLIDWORKS Forums
1 天 前
Not the first time this has happened SW 2016. Deleted a failed insert bend command and am now unable to try again. Is there a way to remove all traces of sheet metal features from a .sldprt?
SOLIDWORKS Forums
1 天 前
I'm trying to figure out a way to create a surface (or solid) using the two curved sketches on top of my part. Both parts are equation driven (right curve: y=1.12717*sqr(x) left curve: y=1.04779*sqr(x)) and I have no idea how to create a surface or solid with the boundary, loft, or sweep feature. I would like the top of my part to look like this:
SOLIDWORKS Forums
1 天 前
Trying to add a swept feature to a part, but can't get it to follow the path that I want. It would be easier to help you if you would attach the file.
SOLIDWORKS Forums
2 天 前
As from the title, i'm trying to design an object as multibody and then convert to an assembly, but this: works just if i made a part in a new file, not i'f i'm working into some assembly.
SOLIDWORKS Forums
2 天 前
Hopefully quick question that I want to sort out now before it comes back to bite me down the road. I'm designing this enclosure with concave/convex back/front faces, and it will be injection molded, so I've applied draft to the overall shape prior to shelling. I added the feature "connector pedestal" to transition into the panel mount flange of a connector, but on the back (concave) face, the two faces have not merged into one.
SOLIDWORKS Forums
2 天 前
Sweep takes unspecified path I want to have this sharp thread face buried into the tube surface. For that I made spiral to go inwardly.
SOLIDWORKS Forums
2 天 前
when i click rebuild i got a What's wrong list with many features that i don't have in my part What happens if you suppress the Body-Delete feature? Could you post your model?
SOLIDWORKS Forums
2 天 前
For a long time I have wanted to set up my custom hardware. The hardware I want to add is for instance DIN ISO 10243 springs and DIN 9861 punches.
SOLIDWORKS Forums
3 天 前
I can't edit my file properties on the custom tab or configuration specific tab. The tables on both are greyed out. :/ EDIT: This only happens in newly created parts in SW 2018.
SOLIDWORKS Forums
3 天 前
I have several iges files that I have imported in 2017 and converted to sheet metal parts. Believe my setting are the same for importing. Now when an iges files is imported in 2018, I select the convert to sheet metal the part goes translucent and no surfaces can be selected giving
SOLIDWORKS Forums
3 天 前
I recently installed SolidWorks 2017 on my laptop. The program doesn't function at all - I can't see the interface / planes and start drawingparts, the work area shows the initial SolidWorks logo.
SOLIDWORKS Forums
3 天 前
I'm trying to make a part where i want to have random letters spred across the part. I have tried just normal "text" and "fill pattern", but it does not give the right look. I'm not the mostexperienceduser of SolidWorks so does somebody know are moreeffectiveway other then type/place each individuell letter?
SOLIDWORKS Forums
3 天 前
Helix sweep slanting problem I am trying to create an auger with a triangular fin. The fin has to stay normal to the axis.
SOLIDWORKS Forums
3 天 前