Does any one know where the impact force went in motion? I want to simulate contact without using contact as I know what will contact and where the contact will occur. There used to be a gas spring model in the training that used this. Did it get taken out?
17 小時 前
I am currently working on a university assignment that involves doing a motion analysis on a Whitworth quick return mechanism that is used in a shaping machine, I have done mathematical analysis in order to obtain plots of the reciprocating rams displacement, velocity and acceleration, now I am looking to verify these results with a SolidWorks motion analysis study. I have created the simplified model pictured below and set up a motion analysis study in order to drive the system at a constant
3 天 前
How would I go about doing a motion study, with several tugger carts? I work for a manufacturing company, and we are trying to get some of our raw material to areas around the plant with a tugger train or several carts attached. I need to design something with a certain turn radius, and am having trouble finding someway of calculating it for several units.
7 天 前
Motion analysis i'am a catia guy and i was asked to do a small projectusing solid works motion analysis. So new to this group and would like to get some help.
9 天 前
..and can't find a solution I posted here some months ago. The OP had posted a camshaft and valves or a crankshaft and pistons (or maybe all) and couldn't get it to work.
11 天 前
I can't understand how the design study receives such an angle? Instead of 30 degrees it shows 1900 degrees! How?!
14 天 前
I am a newbie for both solidwork and motion analysis. Right now I already have a existing robot arm model and want to test its torque limit for a certain motor. I read a lot of tutorials about how to do animation or motion analysis to plot torque result but no one worked for me. I tried the way of adding rotary motor in motion analysis but the arm won't rotate.
14 天 前
Hi Motion Study users, Our computer-aided optimization tool, CORTIME, is now also compatible with Motion Study. Therefore, I would like to hear, if anybody out there is using Motion Study for optimization?
15 天 前
Hi! I am trying to figure out how to make my mechanism works in Motion Analysis. It works when I tried to move the components via Physical Dynamics, but when I tried the following in Motion Analysis:
16 天 前
About limit mate When we simulate a movement with limit distance mate, I realized that there is an acceleration at the input and a deceleration at the output.
17 天 前
About Mate Limit When we simulate a movement with limit distance mate, I realized that there is an acceleration at the input and a deceleration at the output.
19 天 前
About limit distance mate When we simulate a movement with limit distance mate, I realized that there is an acceleration at the input and a deceleration at the output.
22 天 前
Why are my components flying away during motion analysis? When I"m running a motion analysis my chain links are flying away. I used the Chain Pattern command to create the total chain. When I run the study, my sprockets rotate correctly.
23 天 前
the gear and the plate are not concentric. there is a teeth on the plate which will move the gear to rotate. The effect to simulate is that the plate will rotate in a constant speed. when the teeth touch the gear, it will push the gear to rotate. when the teeth is departed with the gear, the gear should stop rotating. I set up the contact between the gear and the plate. But the strange thing is, although the gear will start to rotate when the teeth touch it, but it will not stop rotating when
23 天 前
I'm running a motion analysis to determine the force a linear motor would need to output to open a hatch (axis of rotation is horizontal). I'm happy with most of my results except for the very beginning of my simulation when the actuator starts pushing. I get a huge spike in the output force! I've seen this is a few other peoples results browsing around.
23 天 前
I recently just started looking over some API examples for SwMotionStudy.MotionStudy but I have yet to see anything involving editing specific explode steps from an automatically generated explode animation in a Motion study. Has anyone attempted this?Keith Rice?Deepak Gupta?
26 天 前
Good morning All, I hope somebody can help me with my challenging study. I would like to apply the forces on one side (blue arrows) and determine the resulting force at each pivot point (green circles).
27 天 前
Hi, Im am trying to use a rotary motor in solidworks animation to rotate a chain around 2 sprockets but I keep getting errors? The chain & sprockets manually rotate when I drag them by hand, but when I try to run it in amimation it doesnt work? I would really appreciate any help as I have been trying different things for ages! Thanks.
1 月 前
I'm having a very hard time trying to figure out how to remove the gray appearance on my assemblies when I have the part hidden and then shown as the motion study progresses. I expand the tab in the tree and hit remove appearances. Next I hit play on the motion study, runs just fine. Play it a second time, or rewind the motion study to before the part and it changes back to gray.
1 月 前
I'm trying to get kind of gyroscope simulation assembly is pretty simple: frame, motor (use motor from tools), motion wheel.
1 月 前
hello master solidwork, i've a question, please help me cause i'm a amateur student who studying solidwork i want make the outgoing rack motion on my design,
1 月 前
This is the information that i can findhttp://help.solidworks.com/2017/english/SolidWorks/motionstudies/c_Supported_Functions_SWMotion.htm?id=b99ae5cf38bb4a3d9bb8c273c9c914e8#Pg0&ProductType=&ProductName= but it will be great to have some examples with their respective graphs, i see that there is some kind of logic like the IF function but doesnt seems clear to me.
1 月 前
So i am trying to simulate a chain and sprocket motion, the sprocket should have a constant speed & the chain should be engaged with the sprocket teeth & move in relation to the sprocket speed. Using a gear mate i have mated the inner roller of the chain to the sprocket axis. When the mated chain link moves around the sprocket it is engaged, however when the sprocket leaves the sprocket at a tangent the speed of the chain changed in relation to the sprocket as the link is mated to the axis of
1 月 前
sandblasting simulation Is there a way to simulate sandblasting process in solidworks? Any help will be appreciated.
1 月 前