探索 SOLIDWORKS 使用者討論的內容。
Dear all, I want to use 1 excel file (Design Table) to define the dimensionsof more than 1 parts. For example the inner thread of one part musthave the same dimension as the outer thread of the other part.Therefor I want to define (and couple) these values in 1 file.
SOLIDWORKS Forums
10 年 前
I have dimensional values that I will use in multiple models. Iwould like to know of any thoughts on populating a design table bydriving a macro. My sample external table may look something like this:
SOLIDWORKS Forums
9 年 前
This discussion centers around the results of a divide operation and rounding numbers that are x.50 exactly. I was able to find out by trial-and-error that the Round() function in the Solidworks Equation dialog uses the common statistical rounding rules : If the number is even (4.50, 6.50, etc), it will round down whereas if it is an odd integer, it will round up (15.5 -> 16).
SOLIDWORKS Forums
8 年 前
OK. I have part with configuration "Base" I want to have three configurations based on the features in "Base". I add configurations "A", "B" and "C". So I create "Base" and then add A, B and C. The problem is that when I do this all the features I add in A show up in it's siblings (B/C) and vice versa.
SOLIDWORKS Forums
8 年 前
Changing Default Drafting Standard...? Im looking for a setting that allows you to change the deafult drating standard....My current default standard is ISO, when I change my primary precision, I get a notification that says my drafting standard has been changed to ISO-Modified. Which is fine but then for every new part it reverts back to the default ISO standard...I would like to change my precisions once, not every time I open a new part...
SOLIDWORKS Forums
8 年 前
Similar to the Config/Custom Property Anyone know what the "sw-custom property" code is to get the name of the display state as a custom property
SOLIDWORKS Forums
7 年 前
I'm trying to learn about configurations, and I am picking up quite a bit by just working with them (like most things), but I do have a question. I have a Part with a linear pattern of a feature. Is there any way to edit the number of instances and/or spacing of the pattern in one configuration without affecting the others? I have tried everything I can think of and it looks like I have to have a seperate pattern in each configuration with the other patterns suppressed but I thought I would ask
SOLIDWORKS Forums
6 年 前
I did some work yesterday with a part and design tables. I did not finish. Today I have started working on the part.
SOLIDWORKS Forums
6 年 前
Configurations/Design Tables How to get custom property description value from design table?
SOLIDWORKS Forums
6 年 前
For those interested in doing some "impossible" features, and on doing Top-Down models driven by a design table, download the attached file, then: 2.- Open the Design Table for Edit and on the "Configurator" table enter any value you want (on yellow background cells), then close the design table and rebuild de model.
SOLIDWORKS Forums
6 年 前
I have a wheel (part file) that I use in a bunch of assemblies. I would like to change the base color and the color for some faces(spokes) in my various assemblies. I am also creating a Drawaing document to go with these assemblies. Is there a way to control the color in configurations?
SOLIDWORKS Forums
6 年 前
Good morning! I have been brainstorming a way to efficiently handle our die changeovers and I feel that I am on the edge of something really cool. I just need a little help to make this work in a simple manner. Please see the description below of what I have and where I would like to go:
SOLIDWORKS Forums
5 年 前
Does anyone know how to use a configuration description in a configuration specific property? Currently I have my configuration specific part number referencing the configuration name by $PRP:"SW-Configuration Name", but I can't figure out the value to use to reference the description in tghe configuration, $PRP:"SW-Configuration Description" doesn't work. Never mind, I figured out what I needed to do.
SOLIDWORKS Forums
4 年 前
Configuration names with fractions I'm trying to get configuration names with fractions to work and can't seem to get it. I found a post(here)that gives some info on how to do it using the TEXT function.
SOLIDWORKS Forums
4 年 前
U-Bolt configuration I have an extended length U-Bolt part. I have attached a jpeg.
SOLIDWORKS Forums
4 年 前
Is it possible to added "Component Display States" of a part in an Assembly Design Table? I have a cable assembly which has wires as parts of that assembly. Now I want to be able to link an annotation note in a drawing to the display state name of the wires which is the color of those wires.
SOLIDWORKS Forums
4 年 前
Need help with Driveworks Xpress I have an assembly that contains 8 parts. Each part has a design table.
SOLIDWORKS Forums
4 年 前
I am trying to convert a single CAD file with different configuration to multiple solidworks files with each of them having the configuration from the parent file. For instance, I have a M6 screw sldprt file with different lengths being different configurations. The configuration are M6x10, m6x12, m6x14, m6x16, m6x18...and so on.
SOLIDWORKS Forums
3 年 前
I would like to create a Design Table template with the custom properties added for configuration-specific custom properties. I tried creating a template with the fields started: etc. (see attached)
SOLIDWORKS Forums
3 年 前
Every time I try to open an assembly involving a part with SW design tables the assembly crashes, citing missing configurations. UNLESS I open the part with the design tables first. Is this something that has happened to anyone else and is there a way to fix it?
SOLIDWORKS Forums
3 年 前
I have been drawing in AutoDesk Inventor for some years. I have recently change job and my new firm are using SolidWorks.
SOLIDWORKS Forums
3 年 前
Automatic Configurater I have a large assembly consisting of many parts and subassemblies. It will be used as a template so must have all options available.
SOLIDWORKS Forums
3 年 前
I'm wondering if anyone else has run into this issue with SW 2014 SP3. I have several wire sizes that I have set up in configured part files using Config Publisher in SW 2013. Each one prompts the user for a length, then a part number & description can be selected from a list. This all worked fine in SW2013.
SOLIDWORKS Forums
3 年 前
I just upgraded from SW2012 to SW2014, and one thing I quickly noticed is that when I edit a design table in a new window, it opens up in excel and automatically maximizes excel. Is there a way to not have excel maximize every time? I still want the worksheet maximized in excel but I don't want excel to maximize on my monitor. With SW2012 this did not happen, but the design table would open in a window within excel and excel would stay un-maximized on my monitor.
SOLIDWORKS Forums
3 年 前