Узнайте, что обсуждают пользователи SOLIDWORKS.
I would like to save an anchor point for the rev block so that when a new sheet format is applied, the rev block moves to the anchor point defined when the sheet format was saved. However, when I save my sheet format (defining the anchor point for the rev block first), and try to use it in a new template, the anchor point is not pulled in with the applied sheet format, and the rev block is not in the correct place. I always have to manually redefine the anchor point, while not difficult, it
SOLIDWORKS Forums
6 мин назад
In the What Minor Bugs Drive You Crazy? It was suggested that we split them up some so the SW people can pay attention to those that they deal with so i will start this new one. This evening as I was dimensioning a part with slanted slots using Ordinate dimensioning I found that when the Hole Wizard slots have center marks in them SW will select the center mark ( or the center of the side not sure which) rather than the center of the slot. See below.
SOLIDWORKS Forums
7 мин назад
I am trying to do something that I would think is incredibly simple... I want to hide the break lines in a "Break View". What I thought would work was to add a layer to the drawing and turn that layers visibility off. Then I right clicked on the break lines and changed their layer to the hidden layer.
SOLIDWORKS Forums
12 мин назад
On production drawings we sometimes insert digital images, or MS Word docs with assembly instructions. When positioning annotations with the images the note is sometimes covered.
SOLIDWORKS Forums
10 ч назад
I want to link common dimensions in a sketch. SW help says to right click the dimension & the option is there. Well, it is not.
SOLIDWORKS Forums
14 ч назад
Is it possible to create a PDF that only has bookmarks of the drawing pages not the drawing views in the PDF bookmark tree? SOLIDWORKS 2018 has a setting called "Include Bookmarks" which you can turn off. Before that, there is no control.
SOLIDWORKS Forums
16 ч назад
I've added cosmetic threads into individual pipe parts which are visible in the piping assembly model file, however when I go to make the drawing the cosmetic thread are not visible. I feel like it's something simple I'm missing however I can't seem to get the cosmetic thread with call out to show up in the assembly drawing. ,cosmetic threads
SOLIDWORKS Forums
16 ч назад
When I create a drawing in the View Palette panel sometimes I can see " *Current" sometimes not. Why is that? Maybe your current view is one of the defaults, like Top?
SOLIDWORKS Forums
18 ч назад
I have been doing a lot of frame weldments lately and I am getting annoyed with how I detail them. Here is what I have been doing, please let me know if there is a better way because this is fairly painful. 1.
SOLIDWORKS Forums
21 ч назад
In our office we create assembly and drawing of them. For each assembly, we create other drawing with detail part, usully we use A3 document size with 6 parts in it.
SOLIDWORKS Forums
1 день назад
Sheet Format Size Property call-out I have gone ahead and created all of the A paper size Sheet formats and respective sheet templates for all A0-A4 sizes for our company.
SOLIDWORKS Forums
1 день назад
Is this another one of the large list of SW glitches or am I missing something simple. (All detail circles views are in the correct view area so no confusion with incorrect views). I know I can re-do the views, retain the sketch circle to overcome the situation, however that is not the point. This constantly happens, seems like SW is throwing another hissy (failure to regenerate/update) fit as seems to be the norm for 2017
SOLIDWORKS Forums
1 день назад
Hi , I want to move a point on other plan to have more angle, How I do that? Not sure what's your asking here?
SOLIDWORKS Forums
1 день назад
I would like to create in a assembly a 3d line(drawing) but when I finish my line , I dont have the option toadding thickness of my line thats is on a simple piece not a assembly
SOLIDWORKS Forums
1 день назад
customize revision table I'd like to set up a revision table template to minimize the work I do on our fab drawings. I was able to save the table with the columns I want but there are a couple of things I couldn't figure out how to do.
SOLIDWORKS Forums
1 день назад
Drawing Lines Missing From View I am having an issue with missing lines on a drawing view. The edges that should be shown are of a circular cross section swept in a helix (meant to represent coiled hydraulic hose).
SOLIDWORKS Forums
1 день назад
Changing border font around text Is it possible to change the line font of the border around text? I would like a thicker, phantom line, but I don't see any options to change it.
SOLIDWORKS Forums
1 день назад
Does SW come with a font that conforms to ISO 3098-5? great question. Why not remove all doubt and add one?
SOLIDWORKS Forums
2 дн. назад
I'm trying to drag 2 diameter dimensions from a top view in a drawing to a section view. if I hold ctrl while dragging a dimension, it should make a copy of the dimension in my section view. I've been successful with this before.
SOLIDWORKS Forums
2 дн. назад
ANSI weld symbol top/bottom alignment Does anyone know how to get top/bottom weld symbols to align when making a weld annotation? For some reason they do not line up, no matter what style symbols I use.
SOLIDWORKS Forums
2 дн. назад
During Drafting when I pull view from view pallet it comes in scale of 1:1 which I always select and scaled as per my sheet. but this happens in some cases.
SOLIDWORKS Forums
3 дн. назад
Our legal department has asked me to include a copyright notice with year in our drawing title block (i.e., ©2017). I want it to be automatic text linked to a property just like any other title block field, rather than hard-coded or linked to a manually-created custom property, so no user intervention or future template updates would be required. I was thinking I could somehow extract just the year from SW-Created Date, but I'm stumped. Any ideas on where or how I could grab just the file
SOLIDWORKS Forums
3 дн. назад
Is there a way of setting the HW depth to be the dimension from face to drill point, rather than drill shoulder? I.e. when I specify 80 here:
SOLIDWORKS Forums
3 дн. назад
how to create double arrow for linear dimension at the time of foreshorten. Foreshorten working for Radius but not for linear dimension. I wants the double arrow or zig-zag for foreshorten.
SOLIDWORKS Forums
3 дн. назад