Узнайте, что обсуждают пользователи SOLIDWORKS.
I am checking to see if anyone has developed a macro that saves a flat pattern sheetmetal dxf file using the configuration name. I have sheet metal parts that have numerous configurations, all of the parts have unique configuration names. ,configurations
SOLIDWORKS Forums
3 дн. назад
I am having a hard time moving my command manager back to where it was when I first installed Solidworks 2012... I double clicked somewhere and now it is on the right side instead of the top....
SOLIDWORKS Forums
4 дн. назад
Some of my derived configurations are not appearing on the configuration selection drop down.These are all in a design table. Has anyone seen this before/ know how to fix it?
SOLIDWORKS Forums
6 дн. назад
configuration specific properties (weight) how can I set up my part and assy templates so that any new configurations are automatically populated with certain configuraion specific properties? primarily I would like the property weight to automatically populate and be filled in with "sw-mass". this would allow my epdm data card to have the weight variable filled in for all configurations automatically.
SOLIDWORKS Forums
8 дн. назад
Design tables are not working properly in 2017. If I "open design table in a new window", it will crash. A work-around is to first open it within solidworks (not a separate excel window), *then* open it within excel the second time.
SOLIDWORKS Forums
9 дн. назад
I'm looking for a way add the "Configuration name" in the custom property. Does anyone know if this is possible? ,configurations
SOLIDWORKS Forums
16 дн. назад
I am setting up a design table to control an assembly which included a sub assembly. I am trying to control a distant mate that is in the sub assembly thru the master design table. Is this possible?
SOLIDWORKS Forums
18 дн. назад
I have copied the DME hole standard and want to change the tolerance of the Ejector pin holes. For example we are using the following dimension for1” ejector pins (CB Dia1.3125 x 0.252 dp cbore, Ø 1.0625 thru) but in DME standard we have the following dimensions based on the fit ( Close fit-0.9950in, Normal fit-1 In and loose fit- 1.0050in) . Iam able to update the counter bore diameter and depth but couldn't update the tolerance of the hole.I have updated the screw clearance value according to
SOLIDWORKS Forums
22 дн. назад
First off, apologies for asking a question which seems to get asked a lot - I still cannot find the answer I'm looking for despite much searching! I am trying to display driven dimensions from multiple configurations in a design table/on a drawing. I don't specifically need to display the driven dimensions in a Design Tableper se, I just need to display multiple configuration specific driven dimensions inANYkind of table on a drawing.
SOLIDWORKS Forums
24 дн. назад
I have had to endure this problem for a few years now. I have been able to do a work around by not using a design table in these conditions. Situation now is I am having major issues with BOM Configuration Column's Part Numbers appearing out of numerical order.
SOLIDWORKS Forums
1 мес. назад
Configuring Gear This file is down loaded from Content Central. I want to configure this to use this for an assembly.
SOLIDWORKS Forums
1 мес. назад
I want to link a specif cell in design table to specif cell in drawing general table. Tags:none(add)general table
SOLIDWORKS Forums
1 мес. назад
list external references does... nothing? Hope you're good. I'm having an issue whereby I'm editing an older part which I have used another part to indent from.
SOLIDWORKS Forums
1 мес. назад
Jive Software Version: 2016.3.8.0, revision: 20170907114440.657a983.nomerge_2016.3.8
SOLIDWORKS Forums
2 мес. назад
Desire:Generate Drawing Title Block from Configuration Specific attributes taken from Design Table I have created a number part configurations, driven off values from a design table. (I've figured out how to do that part). In addition to pulling dimensional information for driving configuration creation from an Design Table, can I link non-sketch driving data to my Drawing Title Block?
SOLIDWORKS Forums
2 мес. назад
Does anyone have a Macro that will insert a design table into a part and auto populate? I tried recording the actions and nothing happens when I run it. Jive Software Version: 2016.3.8.0, revision: 20170907114440.657a983.nomerge_2016.3.8
SOLIDWORKS Forums
2 мес. назад
I just upgraded to 2017 from 2015. I am trying to add a configuration to a part from the config manager tree. I used to be able to right click and select from a large dropdown list with many functions. Now i get this:config man menu.jpg
SOLIDWORKS Forums
2 мес. назад
I am struggling with a convenient way to approach this problem. Any help is appreciated, I am not super familiar with design tables so other approaches are also welcome. I have a rectangular bar that, depending on its width (lets say 5" vs 10" wide), gets another row of bolt holes added to alongside the existing set of bolt holes.
SOLIDWORKS Forums
2 мес. назад
I am wondering how big the topic of design automation is for you? In SolidWorks we have built in functionality like equations and configurations that help you to automate your design. But apart from those capabilities there are 3rd party products with superior capabilities and I would like to know who uses a design automation product and why.
SOLIDWORKS Forums
2 мес. назад
Can anyone explain how to create derived configurations in a design table? I currently have two configurations with derived configurations but they were created before the design table was created
SOLIDWORKS Forums
3 мес. назад
Define A, B, T in Properties-> Configuration specific, establish equation make dimensions equal to A, B, T, then make a design table defines $PRP@A, $PRP@B, $PRP@T. The value in Properties-> Configuration specific change with configuration, but not change in equation.
SOLIDWORKS Forums
3 мес. назад
I set up a custom property tab through the "Property Tab Builder" that takes input from designers, basically filling out a gear data table. I also had a sketch block that was basically just a spline profile so that designers could insert the block and then edit it to put their own values in and then use an extrude cut or swept cut to make the teeth. What I want to know is: Is there a way to make sketch blocks pull the properties from whichever configuration the part was in when the block was
SOLIDWORKS Forums
3 мес. назад
Hello everyone. I am new in using design table. So please excuse me if I am asking an already answered question.
SOLIDWORKS Forums
3 мес. назад
Can someone show me how to write a macro for the following tasks? I can’t figure out how to Update Values (steps 1-4) within Excel. - Open Part #1
SOLIDWORKS Forums
3 мес. назад