Узнайте, что обсуждают пользователи SOLIDWORKS.
Категории:
Сортировать:
hey, as in the title, and a beginner of solidworks I looked up the entire internet and never found a 3d sketch of it, can any one give me an idea how to gather all those parts or have an assembly similar to it? Study the Solidworks tutorials and give it your best shot.
SOLIDWORKS Forums
5 ч назад
Solidworks 2016 SP5 on Win10 64 Bit Has anyone experienced a instance of a derived component pattern changing itself to a different config other than the seed component on its own?
SOLIDWORKS Forums
21 ч назад
Interference Detection I wish to know which type of components must exclude.
SOLIDWORKS Forums
1 день назад
Thread of these parts are Right-hand. In order to align these two threads screw mate is used. After an alignment, check mark is placed in the Reverse box automatically.
SOLIDWORKS Forums
1 день назад
I have spent a long time trying to model the plastic base of an RC race car to send it off to be quoted. I did not however know that for a sldprt file to be considered not an assembly it had to also only be one body. So i blissfully unclicked 'merge bodies' for all of the extrudes (ending up with around 200 bodies before i manged to combine some) as this made my mirrors work and life generally easier.
SOLIDWORKS Forums
1 день назад
I'm struggling to find a reason this won't work how I believe it should. So, I create an assembly and I want all of my parts in that assembly mated to the origin. I get all the parts into the assembly and think that I can be clever and choose "Multiple Mate Mode":
SOLIDWORKS Forums
2 дн. назад
I need to convert array of similar parts touching each other along faces into single body with no boundaries. Please advise how to do this
SOLIDWORKS Forums
2 дн. назад
I read a slide presentation about Managing & Best Practices for Large Assembly Models by Tom Cote. He suggested to build "simplified" derived configuration into the start parts. Can someone show me how this work? From time to time I download step file from vendors.
SOLIDWORKS Forums
2 дн. назад
A few releases ago (currently running 2017), Solidworks changed the way that the first inserted part is placed in the assembly. It used to place the first part origin-to-origin automatically. Now, it just allows the user to randomly place the part wherever he/she wants - with no regard to the origin.
SOLIDWORKS Forums
3 дн. назад
Hello, I had trouble fully defining my assembly. I mated the parts. Made gears, gear mate etc. I put the file in attachment, can you check it?
SOLIDWORKS Forums
3 дн. назад
I just installed SW 2018... I opened one of my older assemblies and tried to show multiple parts. It will show 1 part but when I try to show a 2nd part, the first part that was shown disappears and only shows the 2nd part? I then have to hit rebuild to show both parts simultaneously ( a real pain).
SOLIDWORKS Forums
3 дн. назад
I use flexible sub-assemblies with multiple configurations to represent various motion positions. Very often, when I open the top level assembly the constraints will be broken. If I edit the flexible sub-assembly in-place, and conduct a rebuild, the broken constraints will be repaired.
SOLIDWORKS Forums
3 дн. назад
Has anyone ever ran into an assembly they were trying to mate together and your mates constantly disappear? It's pretty much a shaft assembly with mostly concentric, coincident and parallel mates to lock each part in.
SOLIDWORKS Forums
3 дн. назад
Mates popup Could someone shed some light over this, please:
SOLIDWORKS Forums
3 дн. назад
Bone rongeurs comprised of four hinges won't let the fourth hinge mate. Could anyone please let me know how to fix the assembly? You will need to include the part files in the zip file you upload.
SOLIDWORKS Forums
3 дн. назад
Non-manifold surfaces I am having issues 3D printing assemblies. Whenever I combine two parts into an assembly and I want them to connect, they 3D print with a hole between them.
SOLIDWORKS Forums
3 дн. назад
Error opening files. Hole Wizard/Toolbox location? "The hole wizard and advanced hole database is not the expected version" (see attached for full error)
SOLIDWORKS Forums
4 дн. назад
Toolbox part makes fixed parts move...? My countersunk bolts make my fixed parts move around, and I cannot use them.
SOLIDWORKS Forums
5 дн. назад
As the title says, I have a somewhat complex storage system with lots of details on the pallets and racking systems which become drowned beneath all those sketch lines, I know how to go to View>show/hide>sketches but this also takes several images I want to be visible, is it possible to take just the sketch lines but not the sketch pictures? You have found one of the big problems with sketch pictures. To my knowledge, the only option is to go into each part and hide the sketches individually.
SOLIDWORKS Forums
5 дн. назад
I have an assembly which for some reason is no longer rendering, at all. When I open the part the general shape of the assembly shows black then once it loads it disappears completely. The models are all still there as I can hover over them and their faces and edges show up for selection (see image below). If I open any sub-assembly or part they view fine.
SOLIDWORKS Forums
5 дн. назад
I decided to have a go at the SW2016 SP3 Routing Tutorial. I've followed it to the letter so far and no problems......................UNTIL
SOLIDWORKS Forums
5 дн. назад
I have a Spherical Bearing that I want to add the limits that the bearing has so in my upper level assembly I can see how things move or don't so to speak. I want to show the limit of 7 degrees between the 2 axis's, I also do have a point in the denter of each detail
SOLIDWORKS Forums
7 дн. назад
While working with Assembly, I don't know suddenly my assembly changes it position and become taper in view . please find attached images of before and after.
SOLIDWORKS Forums
7 дн. назад
Rename Assembly Note the picture below.
SOLIDWORKS Forums
7 дн. назад