Узнайте, что обсуждают пользователи SOLIDWORKS.
Категории:
Сортировать:
Does any one have macro for creating drawing from assembly For example : Assembly contains 5+ components, It has to create Isometric view in Sheet1 and rest of the each components should be in Sheet 2 , Sheet 3...With standard 3 views and save in same location where assembly file located.
SOLIDWORKS Forums
50 мин назад
I am looking for a way to compare components for similarities. I was attempting to use the Compare Documents feature but that only works if the parts have origins located in the same respective place which in not the case for me is there any way for me to compare two similar part documents and assess them for commonalities. and im looking for API to do this cause i'm going through a massive amount of parts. ,compare_geometry
SOLIDWORKS Forums
5 ч назад
I have a macro feature in my drawing document. I use it to access custom properties and taking some actions according to their values When I use main sub when inserting macro feature, there is no problem but after reopening the document it gives an error.
SOLIDWORKS Forums
9 ч назад
Drawing view Scaling using macro I am new to solidworks macros. I am trying to automate update model and generate drawing views using macros.
SOLIDWORKS Forums
9 ч назад
In a local sub , I would need to test if a flat face of a body is coplanar with a plane, and select it. I can not find the correct library to make this test directly. Does it exist ?
SOLIDWORKS Forums
1 день назад
It's hard to describe the problem.therefore I show u some figures. Figure 1 is one view of a tape.The solid lines are the features in the front of the tape and the dash lines are the features behind the tape,which we cannot see.
SOLIDWORKS Forums
1 день назад
Is there a way to get the normal vector of a face relative to the global coordinate system of an assembly? I am looping through components, getting the bodies, then faces from the top level of an assembly, but when I use the Surface.PlaneParams, or Face.Normal, it is relative to that component's coordinate system, not the assembly coordinate system. You will have to multiply the face normal vector by the components rotation matrix with respect to the assembly coordinate system.
SOLIDWORKS Forums
1 день назад
I've been doing a lot with macros over the past year, and I'm familiar with the macro program "Task". (great for turning a small macro into a batch process) I'm interested if anyone has created, or knows a good approach to do the following?
SOLIDWORKS Forums
1 день назад
I have a following code which is not allowing me to save file to PDF. I was wondering if someone can help me with it. This code, checks if a folder exists and if not it creates the folder, add revision number to the file name.
SOLIDWORKS Forums
2 дн. назад
When I try to get Referenced Document info with the Document Manager from a drawing view from a Pack and Go-ed Drawing the references are pointing to the former document, it seems like the references are not updated. However, when I acces the same Drawing Document by SolidWorks the references are what they should be, pointing to the newly created files as expected.
SOLIDWORKS Forums
2 дн. назад
I have a function in an AddIn that traverses Parts within an Assembly, and does some stuff : ). All is well. One of the aspects of 'stuff' is to set the Parts color (appearance).
SOLIDWORKS Forums
2 дн. назад
I am looking for trainer who can guide me in developing stand alone application based on solidworks API, ePDM API and add-ins using Dot Net technology. Keith Rice. CadSharp.com
SOLIDWORKS Forums
3 дн. назад
I have a macro feature for my drawing and attached a funciton to rebuild event I am getting custom properties but when my function runs it gives an error
SOLIDWORKS Forums
3 дн. назад
I wrote a macro that executes this drawing and dimensioning (Figure 1). But I encountered such a problem. On the view "Drawing view3" you need to set the dimensions of 5 degrees and 45 degrees.
SOLIDWORKS Forums
3 дн. назад
The equations don't work when the assembly packandgo and renamed,is it a bug?Can the equations not be renamed by pack and go? Jive Software Version: 2016.3.8.1, revision: 20171004112525.b7233dc.nomerge_2016.3.8.1
SOLIDWORKS Forums
3 дн. назад
I created a macro that create a note at a position in a drawing and then save this drawing as a PDF in the same folder, but now i want to delete this note after the save as PDF and i don't know how to delete it without selected it. Does anyone know how to do that ? Here is my code :
SOLIDWORKS Forums
3 дн. назад
Here's a macro that I wrote that saves the drawing in SLDDRW, DXF and PDF formats that you can copy & paste into a macro: Public Sub main()
SOLIDWORKS Forums
4 дн. назад
Circular Center Mark How to create circular center mark like this with API?
SOLIDWORKS Forums
4 дн. назад
I was wondering if someone can advise on what are the best restraints to model the wrench-bolt system please (Check picture). I have calculated the contact forces acting on the wrench between the jaws, but I am having trouble figuring out how to restrain the model to get the best results. Tags:none(add)soidworks simulation
SOLIDWORKS Forums
4 дн. назад
Cycle through open drawings? I'm writing a macro to set some print options based on the PDM state of the drawing, the drawing size, and the physical location the print is sent to, then print the open drawing. I wanted to take it one step further and provide a button to print all of the currently open drawing files.
SOLIDWORKS Forums
4 дн. назад
Anyone have a macro to link all drawing views back to a BOM that has been replaced on sheet 1. My guys like to swap out BOM, but sometime they don't re-link the BOM after they load a new one. I have some assemblies that are 5-12 sheets long and can be as many as 30-40 views. Manually linking them is very tedious.
SOLIDWORKS Forums
5 дн. назад
~Newbie~ The big picture...I have a point cloud with hundreds of points and I want to draw a line between point 1 & 2, and then between 3 & 4 and so on.
SOLIDWORKS Forums
5 дн. назад
I work at a company in a transition between two programs. At the moment we are generating every .PDF and .DWG manually. To make this easier i started making a macro to make the process faster and automated. Problem is that i am stuck.
SOLIDWORKS Forums
5 дн. назад
I have pieced together meany things in VBA over the years but something I never understand is how Dim and Set work and what there really doing. I think I get it some times but I don't really understand what I have below. I just know it works. Could someone help explain this to me?
SOLIDWORKS Forums
5 дн. назад