Descubra de lo que están hablando los usuarios de SOLIDWORKS.
COPY WELDMENT FEATURE I am working on a project which has weldments. Layout shape is complicated triangles inside a triangles inside a triangles.
SOLIDWORKS Forums
1 día hace
I don't want to use the automatic cut list feature in the weldment options in any of my parts. I see the message to disable the feature to increase performance
SOLIDWORKS Forums
1 día hace
I have a tube frame with multiple configurations. The tube sizes may vary in each configuration; 1"sq. in some, 1.5"sq. in others, and 2"sq. in another. The issue I am running into is the description for the tube does not update in the cut list and only stays up to date for whichever configuration tube size I updated last.
SOLIDWORKS Forums
1 día hace
I am trying to make a frame that looks pretty much like a cube. I want to keep the position and the way they are welded the same, but that's when the problem occures. The trimmed angle beams are only trimmed where they touch the vertical beam. The last bit of the inside of the corner is not trimmed.
SOLIDWORKS Forums
4 días hace
From the beginning SW had part file,assembly file and drawing file.Later (SW2004) we get possibility to have several bodies inside one file. But after this I think SW went wrong way:they made weldments which contains a lot of bugs up to now (SW2018): I found out that PTC Creo use usual assembly for weldments.In this case it is not necessary to make cut-list, their cut-list properties,derived parts with transfer of cut-list properties to file properties and so on.
SOLIDWORKS Forums
12 días hace
I'm working on some equipment racks and the people here want to get everything properly documented, including BOMs. They are using weldments to model the racks, but I'm not sure this is the best way to go about it. I've never used weldments before, and the racks we're building aren't welded, they're assembled using traditional hardware.
SOLIDWORKS Forums
12 días hace
Need help with weldments. Hi i started using solidworks about 2 weeks ago and have been trying to build an offshore jacket using mainly weldments. However i just realised that instead of completely hollow columns (4 supporting legs), all the bracing are extending to the inside of the columns.
SOLIDWORKS Forums
13 días hace
weldments I am trying to create an offshore jacket in Solidworks. I made the 3d sketch as you can see below. The main problem is that I cannot specify the right dimensions of the tubes.
SOLIDWORKS Forums
16 días hace
Weldment derived configurations Is there a way to stop creating derived configurations every time a weldment is created. I know they can be turned off and deleted at the document level but can this be shut off as a system option?
SOLIDWORKS Forums
22 días hace
Weld Bead font size How to change the Weld Bead font size because these fonts are not changing with other dimension font sizes?
SOLIDWORKS Forums
23 días hace
Have anybody seen Jay Patterson presentation titled "Using weldments to design large structure in SolidWorks" that was presented at SWW, and would like to comment? I just watch the presentation and I am not sure that it convinced me entirely. From a desing point of view it seems that having a large weldment as a single file might not be a bad idea, but if something goes wrong you risk loosing a lot of work.
SOLIDWORKS Forums
26 días hace
weldment profile description I have created a custom weldment profile. When I go to do a cut list in the drawing the description area is left blank.
SOLIDWORKS Forums
29 días hace
I'm using SW2018 SP2.0 My workflow for weldment parts is to rename the folders so that I can use that value in the cut list table and view labels etc. The name I give them is based on the project number.
SOLIDWORKS Forums
1 mes hace
I'm being asked to create a 3D dxf or dwg file based on a frame designed in SOLIDWORKS. Anyone doing this? What method do you recommend?
SOLIDWORKS Forums
1 mes hace
Is anybody noticing this in 2018, I have a weldment and in weldment the custom properties I have added a length field which is named "SW-Length" (using the apostrophe sign above the 2 on the key board), but in the cut list parts it doesn't show the actual length it just show "SW-Length", not the length of the part I am sure this was an issue a few years ago has it reappeared? Or am I doing something wrong.
SOLIDWORKS Forums
1 mes hace
We have a problem with our weldment cut list not combining cut lengths which are clearly the same. We have to manually drag and drop the parts together to avoid duplicate parts on our BOM's. We have been unable to find a cause for this problem although I have noticed people with a similar problem but no solutions, any help would be appreciated.
SOLIDWORKS Forums
1 mes hace
I have been working my way through my Weldments tutorial and after editing a piece of 2x2 angle .SLDLFP to make a 2x3 angle and saving it in my newly created folder as a 2x3 angle.SLDLFP I then navigate my way through the "insert structural member" command and find my newly created library feature. However after selecting the sketch entities that I want to define the structural member and selecting OK I get the screen report "!library feature is empty"
SOLIDWORKS Forums
1 mes hace
I had a bit of unexpected time this Sunday morning so I had a little play to see how SW handles curved mitres. Consider this profile running round a segmental arch
SOLIDWORKS Forums
1 mes hace
I upated the model. the length disappeared from about half of ths weldment bodies. Any ideas on how to fix this. model was started in 2014 sp.5 and converted to 2015 sp 3. currently running 2015 sp. 4
SOLIDWORKS Forums
1 mes hace
I'm having an issue while creating a cutlist table for a'Derived Configuration'of a weldment part in the Drawing! There are three different Derived Configurations for this part I'm working on which all have different lengths of a particular weldment section and etc so when I try to insert a Weldment Cutlist in the Drawing for a particular derived configuration, I only get the options to choose the top level configuration as the reference for the cutlist and consequently, the length of certain
SOLIDWORKS Forums
1 mes hace
Hello, I am working in weldments, after I have created a 3D sketch and run a couple of structural members if I change a dimension in the sketch the front place rotates to be parallel to the right plane. Do you know why this is happening and how I can fix it? Below is a snapshot of all three planes on in my part. I have restarted both Solidworks and my computer.
SOLIDWORKS Forums
2 meses hace
I'm planning to laser cut a series of tubes to create a structure using Weldments/Structural members features and I need to notch/cope its ends I've seen many people transforming the tube into a metal sheet part then using Extruded Cut feature to cut&notch the ends but It seems wrong and I don't feel safe sending this to my cutter.
SOLIDWORKS Forums
2 meses hace
The picture in the attachment will explain my question. (I have a Solidworks standard license)
SOLIDWORKS Forums
2 meses hace
1 I have a multibody weldment part Insert Feature > Save Bodies
SOLIDWORKS Forums
2 meses hace