Descubra o que os usuários do SOLIDWORKS estão discutindo.
I want to start out by saying that my experience is dimensioning parts is very limited. I am just now getting more involved in creating my own mechanical drawings. I know that there is a few "industry standards" that certain prints follow, but I am more concerned on just dimension the internal features that I have on this part. Only key is to keep it simple, which is something I'm struggling on.
SOLIDWORKS Forums
26 dias atrás
Help with changing colors please I am pretty new to Solidworks and am trying to make a snake. I lofted the end of the tail on the surface of another lofted figure(the body) and a black circular line appears.
SOLIDWORKS Forums
27 dias atrás
Does anyone know a good online resource to find practice problems for the CSWP? Have you tried the sample test available from SolidWorks Certification?
SOLIDWORKS Forums
1 mês atrás
Injection Moulding For weeks now I have tried to fix these parts to be injection moulding ready and I just cannot get it to the final stage.
SOLIDWORKS Forums
1 mês atrás
It's pretty simple. Online licensing is completely useless if you need to also use old versions of SW to support clients. This is a good question, I guess online licensing only support SW2018 onwards.
SOLIDWORKS Forums
1 mês atrás
At the company I work for we are attempting to implement an installation of SolidWorks PDM Standard 2017. Vault is up and running, with a second vault set-up for testing purposes - so far so good.
SOLIDWORKS Forums
1 mês atrás
When I try to go to the dropdown menu everything is grayed out except the "Smart Dimension tool" I have tried several things but can not figure out why this is happening. Any one have any ideas or solutions? Tags:none(add)mating menu
SOLIDWORKS Forums
1 mês atrás
Right now I want to build my own robot arm. I have done the most part of robot arm. The only problem is that when I insert my gripper to the top level assembly, the gear mate doesn't work. The left and right sides of gripper seem to be locked and two pieces will rotate towards the same direction rather than the opposite direction.
SOLIDWORKS Forums
1 mês atrás
I built a robot arm and want to use it in ROS(robotic operating system). The problem right now I have is the gear mate works in SW but failed after urdf file loaded in ROS. The two sides of gripper will rotate towards the same direction rather than the opposite direction when I adjust the value of the corresponding motor.
SOLIDWORKS Forums
2 meses atrás
I need to create non-circular holes (like squre, rectangular, rectangular with fillets on the corners, etc), to be pulled out on the hole table the same way we do with circular holes. Is there some way we can combine holes B1 and F1 (with the description square □ 10x10 (in red)), for example.
SOLIDWORKS Forums
2 meses atrás
In PDM Pro I'm trying to set the group level warning 'Check-in' option 'File Name is not unique' so that my users do not inadvertently check in an object with a name that already exists in the database. I need to do this instead of using the 'No Duplicates Allowed' global setting due to other corporate entities allowing duplicates to be made. I have the option set, but it doesn't stop the check-in of files named exactly the same. Does anyone know why this would occur?
SOLIDWORKS Forums
2 meses atrás
APERCU INTEGRE j aimerais enregistrer sous....(format PDF ou JPG ou autre..) le rendu que j ai a l écran en "aperçu intégré", mais je n y arrive pas, avez vous un conseil ?
SOLIDWORKS Forums
3 meses atrás
So I think my parts are injection molding ready. However, when I do normal draft analysis on the base part on 'gradual transition' at 1 degree, it comes out fine (see picture). But when I do the draft analysis when creating 'Parting Line' it has yellow sections along the ribs (which are there to support the lid in place and not for structural purposes).
SOLIDWORKS Forums
3 meses atrás
I am trying to do a drawing and every other time I go to save my work (ctrl S) SWX will crash. Is there anything I can do about this. Are you trying to get it to crash every time, instead of every other time?
SOLIDWORKS Forums
3 meses atrás
could not load solidworks dll: sldshellutils. when i do pack & go this comes up. i have tried to repair the installation via the installer but during repair it claims it cant find the proper installation files to continue the repair. makes no sense.
SOLIDWORKS Forums
3 meses atrás
I have been running my one man Design Consultancy for almost 20 years now, providing mechanical design services to a wide range of companies in the areas of vending machines, gas and solid fuel heating appliances and commercial refrigeration equipment. I love Engineering and also love to make things. As a Designer, I've mostly had to write the story to guide others to make things which can be frustrating when you see people butchering your work !
SOLIDWORKS Forums
3 meses atrás
I just want to see if anyone else is having issues with theForum home screen on my.solidworks.com. I had the issue in the past and it was something on SolidWorks end. So I want to make sure that they are aware.
SOLIDWORKS Forums
3 meses atrás
Im trying to register my product for standard account type to get access to the tuition. We have premium/standard/and flow sim packages but our serial in not recognised.
SOLIDWORKS Forums
3 meses atrás
I am a beginner using SW Flow Simulation, unfamiliar with this software. I would like to design a venturi tube mixing water with air, and simulate the air suction because of the pressure drop in the throat section. This is my simulation, but I would like to know how air and water mix separately...... according to previous comments, it seems that this software can't model the mixing interface between air and water.
SOLIDWORKS Forums
4 meses atrás
I can't install solidworks service pack, can somebody help me? Install stop working on 19%... Jive Software Version: 2016.3.8.1, revision: 20171004112525.b7233dc.nomerge_2016.3.8.1
SOLIDWORKS Forums
4 meses atrás
help about materials etc. hello everyone, my friend and i have to do a school project with solidworks and try to invent or improve something that will make everyday life easier. we've thought about making a boiling pot and put a draining hall on the side of it, near the bottom so you can drain liquids from it in case you are making pasta or something of this sort. i wanted to ask you what do you think will be the best way to try and create such thing and what materials would you make the parts
SOLIDWORKS Forums
4 meses atrás
First post. Former Inventor user, new to Solidworks. I created a flange but the solidworks is inserting the rip centered about the flange edge making for an oddly shaped notch (see screenshot below).
SOLIDWORKS Forums
4 meses atrás
My name is Moshe and it's first time I'm using the forum. I'm trying to make a half sphere of like net/wire using twice the circular pattern feature. One step successful, the second step, which is the very same way, doesn't work.
SOLIDWORKS Forums
4 meses atrás