Property syntax in design table keeps changing back to the value when I re-open the table. I have tried formatting cell to different catagory but It hasn't solve the problem. The Design Table cell suppose to show the result of equation, not equation itself.
SOLIDWORKS Forums
5 days ago
I've got a couple configuration specific custom properties I have in my part file linked to equations. I want these to link to notes I have in my drawing file. Each drawing file only handles one configuration, so I was hoping to link the note to whatever configuration is shown in the drawing file.
SOLIDWORKS Forums
11 days ago
I am. somewhat, asking tongue-in-cheek here.... A coworker and I were discussing a method for completing a task, assigned to me, earlier. I asked his take on a method as he has been here longer and I felt he would have a better feel for how "they" wanted it done (They is really just the two of us, but...)
SOLIDWORKS Forums
12 days ago
I have a simple top down designed assembly that is driven by a very basic layout sketch. The assembly is essentially several slightly different rings stacked together. All of the parts in the design table reference the layout sketch which is used to control the ring diameters. The assembly is set up so that I can change the diameter of all of the components at once by changing one diameter in the layout sketch.
SOLIDWORKS Forums
12 days ago
Design table crashes solidworks Question regarding design tables and Soldworks 2017 SP5.0
SOLIDWORKS Forums
16 days ago
Remove items from Feature Tree Just installed SW2018 and got a lot of CAM related items in my feature tree witch I do not need at this point.
SOLIDWORKS Forums
18 days ago
This is a door hinge with five knuckles. One knuckle was made and liner patterned to get other four knuckles.I want to have two configurations of this hinge, one is with 2 knuckles & other with 3 knuckles to have a complete hinge assembly.Is it possible to do so with Linear Pattern? I'm running SW 2016 so I could not open your file and might have missed any details you have in that design/configuration.
SOLIDWORKS Forums
19 days ago
It might show up here under Options/Messages/Errors/Warnings. If it does, just check it and it should come up again It is check marked.
SOLIDWORKS Forums
20 days ago
This assembly file is down loaded from MySWX. Pneumatic Tire in Standard configuration is replaced with Plastic Tire and this component was suppressed in other configuration from 2 to 10. But it is showing double component except in Configuration 10. What is the reason for that?
SOLIDWORKS Forums
20 days ago
Hi, I have I think 2-3 problems here 1. Often when I add new configurations/lines to design tables, especially ones with derivative parts, not all of the new parts are created when I exit the design table.
SOLIDWORKS Forums
24 days ago
I am working on an assembly with a large number of configurations. Some of the components the assembly uses are identical and I would like to know if there is a way I can add them to the design table as a single column for each set instead of a single column for each individual component? For example, the assembly has 18 components assembled in pairs.
SOLIDWORKS Forums
24 days ago
Configure Dimension command missing? Is it my imagination or did the "Configure Dimension" right-click menu option during sketching disappear in SW 2010. I'm running SP 2.1 and used to use this all the time in SW 2009, but now it's gone.
SOLIDWORKS Forums
25 days ago
i have quite a few hardware files i need to add a predefined set of properties to. i used the Property Tab Builder to create custom property files for our Part, Assemblies, and Drawings.
SOLIDWORKS Forums
26 days ago
Actually, I have created a model of a muffler and assembled with parts and I want to create the design table for the assembly file so kindly do help me on this Need tutorials plzzz
SOLIDWORKS Forums
26 days ago
Design Table I created DT for book case to make ‘Narrow’ and ‘Wide’ configurations. To get a proper book case like structure I edited DT and filled the cell with ‘Narrow’ and ‘Wide’ but it is default to ‘Default’ word after closing and opening the DT.
SOLIDWORKS Forums
29 days ago
Some of my derived configurations are not appearing on the configuration selection drop down.These are all in a design table. Has anyone seen this before/ know how to fix it?
SOLIDWORKS Forums
1 month ago
This is a book shelf in an assembly a file. I want to get this dimension of the length as well, to configure DT. How to get it?
SOLIDWORKS Forums
1 month ago
What is the way to have different Global Variable values for each configuration? Because even though I gave a different Global Variable values for each configuration, it took up the default configuration values. A window pop-ups but it has two separate question with one answer.
SOLIDWORKS Forums
1 month ago
How do we get number of instances from a Design table into a Circular pattern, and vice versa. Is there a way this can be treated like a dimension? SW2017, on a Dell OptiPlex i5.
SOLIDWORKS Forums
1 month ago
I just installed SW2018 last week. I've not had this issue before so I think this may have something to do with the update. When I insert a design table into a part, after creating the table, it does not show up in my feature tree.
SOLIDWORKS Forums
1 month ago
Is there a way to configure a design library feature from a design table in a part? I have tried $configuration @ featurename in the design table but that doesn't seem to work. The library feature has six configurations and the part has six configurations.
SOLIDWORKS Forums
1 month ago
Design table auto create problem. I want to try to auto desing table w/ solidworks 2017 sp4
SOLIDWORKS Forums
1 month ago
Is there a way to drive the name and/or part number from an equation in a Design Table Excel sheet? Let's say I have a part named "X.sldprt" with an open-ended configuration publisher allowing me to enter the length when I insert a new part. I want new configurations to be called "X- ".
SOLIDWORKS Forums
1 month ago
Is there a way to delete, or edit the configuration name to not display the or descriptor in the BOM? Good afternoon Mike,
SOLIDWORKS Forums
1 month ago