Tento web využívá soubory cookie pro zlepšení použitelnosti a sledování návštěv. Použitím tohoto webu souhlasíte s použitím souborů cookie.
Více informací |
I have been reading some information with regards to the contact conditions on a simulation. One of my colleagues asked me how do i know what type of welds am I representing on a simulation of an assembly of a steel frame where mates were used?
SOLIDWORKS Forums
5 minut před
In static simulation, why do we need to put at least two cells in the thickness direction? i need physical explanation. Thanks.
SOLIDWORKS Forums
9 minut před
Im not familiar with solidworks,I want to know how to calculate the min gap size in my model of mesh, i think the automatic value distorts my results which are not in agreement with some simulations I did in cfx ,in cfx I chose max face size of 1.2 mm, I don't find this option in solidworks fluidflow. Ananda Ganesh MadheswaranSep 26, 2017 2:52 AM(in response to Anas Majjouj) first mesh them automatically then make the section view and check for the mesh..
SOLIDWORKS Forums
20 minut před
I am using SW2013 to analyze a frame at room temp and 1000F. Both studies solve, but when I switch between the two I get the Error And Warnings dialog box that tells me the Results are not valid even though I haven't changed anything. Has anyone else seen this problem?
SOLIDWORKS Forums
26 minut před
There is no specific Error Message that pops up. Is there someone to whom i can provide the im logs to help me with this install?
SOLIDWORKS Forums
44 minut před
my question is how solidworks decides to refine the mesh in certain regions? I mean,why in some part of the model,the mesh is finer than the other parts? I assumed it is because of more details at that point but I need more reasons.
SOLIDWORKS Forums
1 hodin před
show maximum stress Hi, i did a static study and the results are shown in the figure i attached.
SOLIDWORKS Forums
1 hodin před
If i have to simulate a large assembly in SW2017, which has repetitive parts which are made by pattern/mirror command. my question here is, Will Simulation accept the pattern command or no? And also do i need bolts/nut in simulations study.
SOLIDWORKS Forums
1 hodin před
I have a user that has a somewhat slow PC, but needs to run simulation studies. Can I specify another PC with more processors to be used for his simulation runs? There is a new system for Simulation offloading to other machines.
SOLIDWORKS Forums
1 hodin před
I was wondering if solidworks simulation replaces structural calculations, or if there is and option to get the calculations it MUST have to do. I ask because we have a lot of customers who ask for a page of calculations to go with whatever design we do. The simulation report is great, but I need more. Can solidworks do this?
SOLIDWORKS Forums
1 hodin před
I am trying to create this branch duct. I have tried a lot but didnt get any success, after that i have designed it in two different parts. Has anyone any idea how to model it with single sheet?
SOLIDWORKS Forums
1 hodin před
any body using dell 3520 mobile workstation for solidworks? If yes...is it able to handle assemblies upto 1000 parts?
SOLIDWORKS Forums
1 hodin před
draftsight 2017 activation I have installed Draftsight 2017 SP2 on two different Windows 7 machines and neither one will activate. When you complete the activation information and hit OK the screen flashes and the Draftsight closes.
SOLIDWORKS Forums
2 hodin před
i am designing girth gear. The customer require to create gear model within short time by entering simple dat like module, number of teeth, helix angle. So, I planned to use macros/API. Kindly provide example problems like or model programs...etc to know about API/macros....plz
SOLIDWORKS Forums
2 hodin před
Have been thinking about starting this discussion for a while with our local user group, but why not start it on the forums! The question is what other software tools/utilities do you use everyday in your normal workflow? Mainly looking for the free ones, or that have free versions to start with.
SOLIDWORKS Forums
2 hodin před
I started Solidworks. I created a new assembly. Then I opened Toolbox and I added a part from it:
SOLIDWORKS Forums
2 hodin před
I'm looking to add a prefix, such as "1-", to all of a certain configuration specific properties named "ItemNumber". However, I've not been able to find a method using Dispatch to add this prefix in the manner I want.
SOLIDWORKS Forums
3 hodin před
I use security features when saving/printing any document as pdf (when using Office, Excel etc.). So that when the document is saved, the pdf file cannot be edited. When we do a Save As with SolidWorks, is there an option where we can preset pdf options with security/protected features?
SOLIDWORKS Forums
3 hodin před
I'm the IT admin of my company and one of my users has been unable to use their application for the past few days. Attempting to launch the program does yield the startup splash screen but before it is able to fully launch, the program closes and kills the process.
SOLIDWORKS Forums
3 hodin před
How the Lay out sketches can be used in the Top Down Mold Design environment effectively? Will it be a good option? Is there any other better approach which can support drastic layout changes or concept changes or even the part model modifications?
SOLIDWORKS Forums
4 hodin před
I have no knowledge of how a Macro works but I am reading the discussions and what I am thinking of doing seems possible. We use the same file name format for all our files. Parts are "XXXX XXX XX D###", while assemblies are "XXXX XXX XX A###" We have a custom property of "01-DetailNumber" that we currently manually type in every time.
SOLIDWORKS Forums
4 hodin před
Hi everyone! I am new to SolidWorks and haven't been taught dimensioning well. Thus, I am having issues figuring out the nit-picky details of SolidWorks dimensioning.
SOLIDWORKS Forums
4 hodin před
SolidWorks, let's fix the problems first! The past few weeks I have had many complaints and see my system telling me that Resource Monitor Critically LowALL THE TIMEwhen I have SW open.
SOLIDWORKS Forums
5 hodin před
Using EPDM SW2017 SP1, when I try to create a new vault view, the archive server is no longer found automatically: I can add it manually, but this is new behavior despite the fact that I haven't changed anything. Same results on two different clients.
SOLIDWORKS Forums
6 hodin před